Printer Friendly Tell a Friend

3G Headset for 3/4 Open face helmets

3G Headset for 3/4 Open face helmets
Highlights:
This 3GOPEN headset is used on 3/4 OPEN helmets, and is the same as our 3GMOD modular headset when the internal boom mic is used.  The external RCA mount boom mic may be fitted, but generally not recommended if you use a face shield or extended visor.

Available NOW for:
* Honda Goldwing/Valkyrie
* Yamaha Venture
* Kaw Voyager (Select from 1300 5-pin or 1700 7-pin)
* Air Rider COBRA 75 WX ST
* Victory Vision
* Can Am Spyder
* BMW Voice II
* Harley Davidson Glide/Ultra
* J&M CB2003/Integratr

* Direct-Connect to iPod/GPS/Standard Universal audio devices with mic input (optional), and audio output on 3.5mm standard jacks.
Price: $211.00
Code: 3GOPEN
Boom Microphone mount:
External plug-in (RCA plug)
Internal mount (TAB/Dual-Lock)
Lower Cable:

Qty:

General
Included in each Full Face Goldwing Kit
One each 3G Module, an optional microphone (external boom or internal boom), a removable upper 3G cable and lower 3G cable, two speakers with mounting pouches, and a choice of several lower cables to fit all models of touring bikes.
Electrical
Gold Plated Connectors
Industry standard Molex connectors for speaker and microphone plugs/jacks, standard DIN/Mini-DIN 5, 6, and 7-Pin connectors for bike, and upper lower cords. All electrical connections are gold plated.
Helmet Styles
Open Face
This headset is designed for typical OPEN Face Helmets, and can be used on N-Com helmets and others by mounting normally over or close to any manufacturer's mounting features.
Shorty/Half Shell Helmets
This headset can be used with Half Shell or Shorty helmets as well when configured with the RCA external boom mic and the helmet has an ear curtain to mount speakers into. Also, may use any wearable 3.5mm (1/8th in) stereo headphones.
Kit Contents
Weather Plugs
Our 3G headsets have three jacks for an external mic, an audio in/out jack, and the upper cable jack. We provide rubber weather plugs to keep rain and dust out of your connectors.
Adhesive Primer
One vial of 3M Primer 94 is included to ensure that our patented mounting system has maximum strength.
Foam Backing for 3G Module
This foam backing pad is not required, but is included to improve the looks of the 3G module by filling in any small variations in the shape of helmets vs the module.
Warranty
Our Guarantee of quality
3-Year no-nonsense warranty. Covers normal use for all parts of the headset.
Audio Components
Speakers
1.6" diameter x 3/8" thick (including pouch and mounting fasteners) , 8-Ohm, 50 - 20Khz, 86dB/w SPL, 0.2W power max, continuous operation at 0.175mW
Microphone
Uses internal boom microphone (preferred if shield is used) or external boom mic. 550-Ohm dynamic moving-coil element, 50-20Khz response. Mic is also used when the EdSets Power Cable lower cord is used on powered mic systems.
Audio Cables
Upper Cable
Gold plated straight 5mm cable plugs into 3G module, is removable and can be left in place indefinitely.
Lower Cable
Lower cable with standard DIN 5, 6, or 7-Pin lower connector, depending on the factory system the headset will be used on, including direct to GPS, handlebar CB, iPod, etc.. Upper connector mates with EdSets Upper Cable only.
All Cables
All our cables are made with stranded Kevlar to ensure that the helical wound electrical conductors never take any mechanical loads, ensuring long life.
Textiles
Speaker Pouches
Our patented speaker pouch is made from helmet liner padded material for comfort and acoustic transparency, and with sturdy backs for mounting with Velcro. Speakers may be mounted in the pouches or without pouches in helmets that have pockets or skirts t
Windscreen
Foam windscreen comes with boom microphone, and the mic can have 3/4 heat shrink applied to reduce extreme wind.
EdSets, LLC
207 Mill Pond Chase, Warner Robins, GA 31088
(937)271-4077(Call Mon-Fri 9-5 Eastern Standard Time, no exceptions please)
Copyright 2012, All rights Reserved