Printer Friendly Tell a Friend

3G Headset for Half/Shorty Helmets

This headset is used on HALF SHELL OR SHORTY helmets.  It generally uses an external "plug in" mic which has a standard RCA male/female mounting system.  You can use the same microphone (internally square-tab mounted) mic as our 3GMOD headset if you attach it to chinstraps with Velcro.
Available NOW for:
* Honda Goldwing/Valkyrie
* Yamaha Venture
* Kaw Voyager (Select from 1300 5-pin or 1700 7-pin)
* Air Rider COBRA 75 WX ST
* Victory Vision
* Can Am Spyder
* BMW Voice II
* Harley Davidson Glide/Ultra
* J&M CB2003/Integratr

* Direct-Connect to iPod/GPS/Standard Universal audio devices with mic input (optional), and audio output on 3.5mm standard jacks.
Lower Cable:

New Thunderclap Speakers:

AvailabilityClick image for options and ordering. Ships 0-1 days.
Weight1.25 lb
NOW AVAILABLE: EdSets new Thunderclap speakers! Just click above to select them. You won't regret it! These are the hottest speakers in the market place with plenty of punch for highway speeds, bass response, clear highs and stainless steel grilles for durability!


Standard non-powered Lower Cables available now:
* Honda Goldwing/Valk 5-Pin systems
* Yamaha Venture and, Kawasaki Voyager (pre-'08) 5-Pin
Air Rider COBRA 75 WX ST 5-Pin systems
* Older HD factory systems with 5-Pin factory jacks.
Direct-Connect to iPod/GPS/Standard Universal audio devices with mic input (optional), and audio output on 3.5mm standard jacks.

EdSets "Power Cables" for amplified microphone systems from:
* Victory Vision factory system (7-Pin Radio Sound pinout)
* Can Am Spyder factory system (7-Pin Radio Sound pinout)
* Kawasaki 1700 factory system (7-Pin Radio Sound pinout)
* Harley Davidson factory system (7-Pin Harley Davidson unique pinout)
* BMW Voice II system (6-Pin J&M/BMW pinout)
* J&M CB2003 handlebar CB (6-PinJ&M/BMW pinout)

PLEASE NOTE when using your headset on different bikes:
> EdSets uses the lower cable to match the bike to the headset.  
> We put the preamplifier, if required by the bike, into the lower cable itself (lowers cost for non-amped mic systems).
> You can ride any bike mentioned above by using the appropriate lower cable.
> All Radio Sound sourced systems can use the same Power Cable, but we differentiate the preferred cable based only on the need for 90-degree or 180-degree (straight) lower plugs. 
> HD pinout is unique, fits ONLY HD, it is 7-pin, but different pin assignments than others.  There is a straight and right angle available for the two jack types on the Harley series.
> All 6-Pin systems are interchangeable, performance may vary depending on the bike. 
> All 5-Pin systems are interchangeable, and are the only bikes that do NOT require an externally amplified microphone system.

Direct Connect cables for consumer electronics:
* 3G "Zumo' lower cable for this 3G headset works with GPS that have standard 3.5mm (iPod style) audio output jack, and 2.5mm mono mic input jack.  Most bluetooth GPS will have these jacks.
* Some handheld CB radios may be adapted using the 3G Zumo cable as long as the unit can use a dynamic microphone.
* Use our male-to-male patch cable to connect an iPod to the 3G module to listen to iPod when not on a bike with a factory system.

HOW TO ORDER:  Choose your bike system from the drop-down list, and whether you need a right angle plug for the bike or a straight one if available, then place one headset per helmet in your cart and proceed to checkout.

Included in each Full Face Goldwing Kit
One each 3G Module, an optional external RCA-mount microphone, a removable upper 3G cable and lower 3G cable, two speakers with mounting pouches, and a choice of several lower cables to fit all models of touring bikes.
Gold Plated Connectors
Industry standard Molex connectors for speaker and microphone plugs/jacks, standard DIN/Mini-DIN 5, 6, and 7-Pin connectors for bike, and upper lower cords. All electrical connections are gold plated.
Helmet Styles
Shorty/Half Shell Helmets
This headset is designed for typical Half-Shell Helmets and should be mounted on the shell lower edge
Kit Contents
Weather Plugs
Our 3G headsets have three jacks for an external mic, an audio in/out jack, and the upper cable jack. We provide rubber weather plugs to keep rain and dust out of your connectors.
Adhesive Primer
One vial of 3M Primer 94 is included to ensure that our patented mounting system has maximum strength.
Foam Backing for 3G Module
This foam backing pad is not required, but is included to improve the looks of the 3G module by filling in any small variations in the shape of helmets vs the module.
Our Guarantee of quality
3-Year no-nonsense warranty. Covers normal use for all parts of the headset.
Audio Components
1.6" diameter x 3/8" thick (including pouch and mounting fasteners) , 8-Ohm, 50 - 20Khz, 86dB/w SPL, 0.2W power max, continuous operation at 0.175mW
Uses ONLY the external mount boom mic (RCA mount). 550-Ohm dynamic moving-coil element, 50-20Khz response. With Power Cables, can be used on any touring bike.
Audio Cables
Upper Cable
Gold plated straight 5mm cable plugs into 3G module, is removable and can be left in place indefinitely.
Lower Cable
Lower cable with 5-Pin DIN compatible with all Asian 5-Pin factory systems. Upper connector to mate with EdSets Upper Cable only.
All Cables
All our cables are made with stranded Kevlar to ensure that the helical wound electrical conductors never take any mechanical loads, ensuring long life.
Speaker Pouches
Our patented speaker pouch is made from helmet liner padded material for comfort and acoustic transparency, and with sturdy backs for mounting with Velcro. Speakers may be mounted in the pouches or without pouches in helmets that have pockets or skirts t
Boom mic can be used with both heat shrink tubing and foam windscreen for exterme wind noise protection. USe 3/4" diameter, 1.25" length, thin wall shrink).
Garmin Zumo GPS Cable for 3G - $60.89
This cable is a replacement for the normal EdSets lower 3G coiled cable.  It connects to the 3G upper cable and to the Zumo cradle.  This lower cord is typically used by Sport, Sport-Touring and Cruiser riders that use the Zumo for their only audio system and are using our 3G headsets with it.   The cable supports Bluetooth Phone calls (incoming and outgoing), Voice Dialing, and also lets you hear XM Radio, MP3 player and Voice Nav prompts if you have those features activated. 

NOTICE: This cable DOES NOT integrate the Zumo into a Goldwing system.  If you want to do that, get the '1800 Mic Splitter' cable, which will allow you to use your headset normally, but also supply the Zumo with a microphone signal for phone calls, and you will hear the audio from the Zumo over the AUX on the Goldwing (cables available at any electronics outlet, look for '3.5mm headphone extension cable'.

Go to Headsets Page
View GL1500/1800 Mic Splitter Instructions
Helmet Installation - $65.00
Ordering installation services provides you one "installation" for each helmet. By setting the quantity to 1 or 2 for example, you pay for one or two helmets to be professionally installed. After you order installation services you will simply take your helmets to the UPS store or a similar facility and have them include prepaid return shipping labels (+ 2 pounds per helmet) inside the box to your address. We will automatically set your order status to 'EdSets Install' and we will not ship anything to you until your helmets arrive and leave here using your return lable.

NOTE: Use of packing 'peanuts' instead of paper or foam incurs an additional charge for removing and replacing the loose peanuts. We do not use packing peanuts at EdSets because of the mess.  

Send them to  "EdSets Installation 207 Mill Pond Chase, Warner Robins, GA 31088" read more...