EdSets High Fidelity Intercom Headsets
Topic Information
 Added by  mjw930
 Added  2 Nov 2009, 12:08 PM
 Last Updated  1 Dec 2009, 7:21 AM
 Topic  Adapter for Victory CB/Intercom
Just wondering if there's any thought to creating a 5 - 7 pin adapter to allow 5 pin GL1800 cables to work with the 7 pin Victory connector?
 
From what I've been able to determine Victory uses the following pinout
 
Pin 1 = microphone input +
Pin 2 = headphone shield and - (ground)
Pin 3 = right headset +
Pin 4 = microphone bias
Pin 5 = left headset +
edsetsco
Actually, I have the design already done, what I have to do is make sure the mic preamp inside the cable is perfectly set for the right amount of gain. The Victory, like Harley, requires a mic preamp in the headsdet, but we're building it into the cable so the headset can be used on any bike with the right lower cable. Give me a couple months, and we should have something going by then.
 
I need the feedback from some early testers before moving forward on making the preamps and then putting them inside the molded cables.
 
Ed
 
Just wondering if there's any thought to creating a 5 - 7 pin adapter to allow 5 pin GL1800 cables to work with the 7 pin Victory connector?
 
From what I've been able to determine Victory uses the following pinout
 
Pin 1 = microphone input +
Pin 2 = headphone shield and - (ground)
Pin 3 = right headset +
Pin 4 = microphone bias
Pin 5 = left headset +
 

EdSets, LLC
2416 Passage Key Tr., Xenia OH 45385
(937)271-4077(Call 9-5 Eastern Standard Time)
Copyright 2009, All rights Reserved
ViArt - PHP Shopping Cart