Compare

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $121.00
Code: 3G
Availability: Ships same day or next. Click image for options and ordering.

EdSets Sonic Series 3G Headsets

ADVANTAGES:  Industry's best sounding and most advanced
wired headset has 3.5mm jack for earbud speakers and other uses,
a two section upper/lower Kevlar core cable system, and can accept
three types of microphones  to fit all helmet styles.   No bulk inside
helmet, just the speakers and mic, if any.  Applicable to all helmet
styles.  All cables are removable and we offer three lower cable
styles for 5 and 6 pin systems as well as a Zumo 550 lower cable.
 
DISADVANTAGES:  Slightly more expensive than 2G kits.  3G module
stays on outside of helmet, but is removable (snap on-snap off) up to
3000 times.

APPLICATIONS: Use in virtually any helmet.  (HJC Symax 2 owners
click for Installation Options and use 2G kits if this mount is not ok.

Choose our "Surface Mic" for Full Face helmets (see gold helmet)
and choose our RCA mount boom mic on 3/4 or Half/Shorty helmets.
(see blue hemet)

For Modular/Flip helmets, we usually recommend the Surface Mic, but
it will travel with the chinbar up and down.  To use a boom mic that stays
in place all the time, choose our internal "TAB" mount boom mic. NOTE: The
chinbar may interfere with the boom when the chinbar is closed.  Check your
helmet before ordering using a bendable soda straw or fat wire between
the cheekpad and helmet shell where you would want your mic to come out.

You may also choose the TAB mic if you you have a face shield on a 3/4
helmet that may prevent the RCA boom mic (on blue helmet)  from being
placed in front of your mouth.

Basic Kit comes with upper cable, speakers & pouches, 3G Module (pointy thing)
and all installation parts and instructions.  You choose lower cable, mic type
and any other desired options when ordering.  Watch as your price  changes
according to your chosen options.

Compare

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $87.00
Code: 2G
Availability: Ships same day or next. Click image for options and ordering.

EdSets Sonic Series 2G Headsets
ADVANTAGES:  Simple headset with single cable from headset to
bike. Lower in cost and has same HiFI components as 3G.  Only the
'dongle' is visible at all times.

DISADVANTAGES:  Some helmets may not have space under the
left cheekpad for the 'dongle' and a boom mic mount.  Not for use
in Half/Shorty helmets.  Single cable is more difficult to plug-in since
you cannot see it while the helmet is on.  'Dongle' is not removable
without removing speaker and mic wires, and may touch your shoulder
at times.  Requires adapter for 6-pin systems.

APPLICATIONS: Use in all helmets except half-shell/shorty.  Use 3G
kits for those helmet types. 

Choose our "Surface Mic" for Full Face helmets (see red helmet) and
choose our TAB mount boom mic (internal mounted)  for 3/4 helmets.

For Modular/Flip helmets, we usually recommend the Surface Mic which is
mounted on the inside surface of the front chinbar, but it will travel with the
chinbar up and down.  To use a boom mic that stays in place all the time,
choose our internal "TAB" mount boom mic. NOTE: The chinbar may interfere
with the boom when the chinbar is closed.  Check your helmet before ordering
using a bendable soda straw or pencil inserted between the cheekpad and
helmet shell where you would want your mic to come out.

Basic Kit comes with speakers & pouches, 2G Helmet Harness ('dongle')  and
all installation parts and instructions.  You choose lower cable, mic type
and any other desired options when ordering.  Watch as your price  changes
according to your chosen options.

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $55.00
Code: ES-Install

Ordering installation services provides you one "installation" for each helmet by setting the quantity of 1 or 2 for example, for one or two helmets. After you order installation services you will simply take your helmets to the UPS store or a similar facility and have them include prepaid return shipping labels inside the box to your address.  Send them to "Buckeye Riders Services. PMB 110 2115 S. Main St., Bellefontaine, OH 43311.