This is the only modular molded earbud adapter in production and fits most systems with 5 or 6 pin full size DIN jack, including Honda, Yamaha, Kawasaki, Suzuki and 89-97 Harley 5-Pin systems.  We do NOT have a 7-Pin version for later HD systems.

Use the 5-5 Pin version on Wings and similar bikes with EdSets or 5-Pin lower cord sets from other makers.  Use the 6-5 Pin if you want to use EdSets with your BMW or J&M CB2003 handlebar unit.  Use the 6-6 Pin version if you have BMW or J&M CB2003 with 6-pin lower cord headsets.

The pins and jacks are simply a  "pass through" connector (5-5 or 6-6 pin configuration) and there are no electronics or mixing amplifiers in this adapter.  The 6-5 Pin model converts pinout and ground from 6-5 and single to common speaker ground.  You can use a 5-5 Pin unit on later HD, but you will not be able to use your headset mic or your lower cable, it will only work as an earbud jack without the headset cable.

EdSets Universal adapters provide a 3.5mm stereo in/out jack for all pin systems so that you can use regular or custom fitted "earbuds" to hear your intercom/bike system or with a short male-male 3.5mm cable, you can drive your headset with an MP3 player directly on other bikes that don't have intercom or music systems.  We do not currently sell the male-male cable since it is commonly available at most electronic retailers. 

Available in 5-to-5, 6-to-5, and 6-to-6 pin configurations.  The 5-5 configuration will work on Harley Davidson systems, 5 and 7-pin styles, but the PVC housing may not be compatible with the newer model HD headsets and bike plugs.  See the images closely before ordering, or call if you're not sure this is a good fit for your Harley system.

NOTE:  It is not advisable to use the 3.5mm jack as an input while connected to a motorcycle intercom system that is on and operating.  Doing so is at your own risk.