3G Headset for 3/4 Open face helmets Print this pagePrint this page
3G Headset for 3/4 Open face helmets
Price: $235.00

Lower Cable BMW VII & All J&M 6Pin (+ $25.00); Can Am Spyder (+ $25.00); Harley 5-Pin Factory ; Harley 7-Pin Factory (+ $25.00); Honda Goldwing/Valkyrie (All) ; Air Rider Cobra 5-Pin Handheld ; Kawasaki Voyager 5-Pin ; Kawasaki Voyager 1700 (+ $25.00); Yamaha Venture (All) ; Victory Vision (+ $25.00); iPod/GPS/Universal
Boom Microphone mount External plug-in (RCA plug) ; Internal mount (TAB/Dual-Lock)
Plug Style Straight for rear typically ; Right Angle for front typically
Plug Style Straight for center tank jack ; Right Angle for left tank jack
Plug Style Straight for rear typically ; Right Angle for front typically
New Thunderclap Speakers Upgrade: (+ $24.00); Speaker Velcro (Hook+Loop) (+ $3.50)
Pro-Installation Pro-Install (+ $65.00)
Highlights:
This 3GOPEN headset is used on 3/4 OPEN helmets, and is the same as our 3GMOD modular headset when the internal boom mic is used. 

The external RCA mount boom mic may be fitted, but generally not recommended if you use a face shield or extended visor. With the RCA, you will want to use the thumbtack to keep the mic seated in hot climates where the heat can loosen the friction mount.


Available NOW for:
* Honda Goldwing/Valkyrie
* Yamaha Venture
* Kaw Voyager (Select from 1300 5-pin or 1700 7-pin)
* Air Rider COBRA 75 WX ST
* Victory Vision
* Can Am Spyder
* BMW Voice II
* Harley Davidson Glide/Ultra
* J&M CB2003/Integratr

* Direct-Connect to iPod/GPS/Standard Universal audio devices with mic input (optional), and audio output on 3.5mm standard jacks.

Note:

Availability: Click image for options and ordering. Ships 0-1 days.
Weight: 1.25 lb
Description
NOW AVAILABLE: EdSets new Thunderclap speakers! Just click above to select them. You won't regret it! These are the hottest speakers in the market place with plenty of punch for highway speeds, bass response, clear highs and stainless steel grilles for durability!

USE THIS HEADSET ON 3/4 OPEN-FACE HELMETS WITH OR WITHOUT FACESHIELDS

Standard non-powered Lower Cables available now:
* Honda Goldwing/Valk 5-Pin systems
* Yamaha Venture and, Kawasaki Voyager (pre-'08) 5-Pin
*
Air Rider COBRA 75 WX ST 5-Pin systems
* Older HD factory systems with 5-Pin factory jacks.
*
Direct-Connect to iPod/GPS/Standard Universal audio devices with mic input (optional), and audio output on 3.5mm standard jacks.

EdSets "Power Cables" for amplified microphone systems from:
* Victory Vision factory system (7-Pin Radio Sound pinout)
* Can Am Spyder factory system (7-Pin Radio Sound pinout)
* Kawasaki 1700 factory system (7-Pin Radio Sound pinout)
* Harley Davidson factory system (7-Pin Harley Davidson unique pinout)
* BMW Voice II system (6-Pin J&M/BMW pinout)
* J&M CB2003 handlebar CB (6-PinJ&M/BMW pinout)

PLEASE NOTE when using your headset on different bikes:
> EdSets uses the lower cable to match the bike to the headset.  
> We put the preamplifier, if required by the bike, into the lower cable itself (lowers cost for non-amped mic systems).
> You can ride any bike mentioned above by using the appropriate lower cable.
> All Radio Sound sourced systems can use the same Power Cable, but we differentiate the preferred cable based only on the need for 90-degree or 180-degree (straight) lower plugs. 
> HD pinout is unique, fits ONLY HD, it is 7-pin, but different pin assignments than others.  There is a straight and right angle available for the two jack types on the Harley series.
> All 6-Pin systems are interchangeable, performance may vary depending on the bike. 
> All 5-Pin systems are interchangeable, and are the only bikes that do NOT require an externally amplified microphone system.

Direct Connect cables for consumer electronics:
* 3G "Zumo' lower cable for this 3G headset works with GPS that have standard 3.5mm (iPod style) audio output jack, and 2.5mm mono mic input jack.  Most bluetooth GPS will have these jacks.
* Some handheld CB radios may be adapted using the 3G Zumo cable as long as the unit can use a dynamic microphone.
* Use our male-to-male patch cable to connect an iPod to the 3G module to listen to iPod when not on a bike with a factory system.

HOW TO ORDER:  Choose your bike system from the drop-down list, and whether you need a right angle plug for the bike or a straight one if available, then place one headset per helmet in your cart and proceed to checkout.


Specification
General
Included in each Full Face Goldwing Kit One each 3G Module, an optional microphone (external boom or internal boom), a removable upper 3G cable and lower 3G cable, two speakers with mounting pouches, and a choice of several lower cables to fit all models of touring bikes.
Electrical
Gold Plated Connectors Industry standard Molex connectors for speaker and microphone plugs/jacks, standard DIN/Mini-DIN 5, 6, and 7-Pin connectors for bike, and upper lower cords. All electrical connections are gold plated.
Helmet Styles
Open Face This headset is designed for typical OPEN Face Helmets, and can be used on N-Com helmets and others by mounting normally over or close to any manufacturer's mounting features.
Shorty/Half Shell Helmets This headset can be used with Half Shell or Shorty helmets as well when configured with the RCA external boom mic and the helmet has an ear curtain to mount speakers into. Also, may use any wearable 3.5mm (1/8th in) stereo headphones.
Kit Contents
Weather Plugs Our 3G headsets have three jacks for an external mic, an audio in/out jack, and the upper cable jack. We provide rubber weather plugs to keep rain and dust out of your connectors.
Adhesive Primer One vial of 3M Primer 94 is included to ensure that our patented mounting system has maximum strength.
Foam Backing for 3G Module This foam backing pad is not required, but is included to improve the looks of the 3G module by filling in any small variations in the shape of helmets vs the module.
Warranty
Our Guarantee of quality 3-Year no-nonsense warranty. Covers normal use for all parts of the headset.
Audio Components
Speakers 1.6" diameter x 3/8" thick (including pouch and mounting fasteners) , 8-Ohm, 50 - 20Khz, 86dB/w SPL, 0.2W power max, continuous operation at 0.175mW
Microphone Uses internal boom microphone (preferred if shield is used) or external boom mic. 550-Ohm dynamic moving-coil element, 50-20Khz response. Mic is also used when the EdSets Power Cable lower cord is used on powered mic systems.
Audio Cables
Upper Cable Gold plated straight 5mm cable plugs into 3G module, is removable and can be left in place indefinitely.
Lower Cable Lower cable with standard DIN 5, 6, or 7-Pin lower connector, depending on the factory system the headset will be used on, including direct to GPS, handlebar CB, iPod, etc.. Upper connector mates with EdSets Upper Cable only.
All Cables All our cables are made with stranded Kevlar to ensure that the helical wound electrical conductors never take any mechanical loads, ensuring long life.
Textiles
Speaker Pouches Our patented speaker pouch is made from helmet liner padded material for comfort and acoustic transparency, and with sturdy backs for mounting with Velcro. Speakers may be mounted in the pouches or without pouches in helmets that have pockets or skirts t
Windscreen Foam windscreen comes with boom microphone, and the mic can have 3/4 heat shrink applied to reduce extreme wind.

Images

jo5x05d6.jpg
jo5x05d6.jpg
3GOPEN-600X300_2_2.JPG
3GOPEN-600X300_2_2.JPG
 
ftiw07w3.jpg
ftiw07w3.jpg
 

Accessories