GPS Headsets and Accessories

Compare

Microphone Style:
Tab Mount Boom Mic (shown)
RCA Mount Boom Mic
Surface Mount Chinbar Mic (- $23.00)

EdSets 3G headset with lower cable suitable for GPS like Garmin Zumo, Nuvi and similar with audio and microphone jacks. Add different lower cable to also use on Goldwing/Venture/Voyager and some other systems.

Plug Style:
Select Plug Style 2.5mm Straight

NOTE: The EdSets Mic splitter has an option for an audio cable to connect your Bluetooth GPS into the AUX input on a Goldwing.  If you don't already have this audio cable, it is optional when purchasing the Mic Splitter and is a quality 3-foot gold plated cable.

Choose from models for Goldwing (1800 or 1500), CB2003, or a 'universal' wire-tap model you can use on any bike or system where you have access to the microphone lines.

This simple cable gives you the ability to use your helmet headset to make phone calls when you pair your Bluetooth Cell Phone with a Bluetooth GPS.  It is a simple Plug-and-Play installation.  Once installed, and your bike set to AUX input (with your audio extension cable for GPS audio) the signal splitter completes the picture by giving the GPS your headset's microphone signal so you can speak out over the phone through the GPS.  Everything your bike did before is still working the same as always.

Now, you have GPS Voice Nav + Bluetooth Cell Phone calls + XM Radio + MP3 Music + CB + Intercom in your helmet (XM is not part of all GPS).  With a Bluetooth Phone, GPS and our Mic Splitter, you're completely set for all 6 audio streams and all three voice outputs you need!

This cable is a replacement for the normal EdSets lower 3G coiled cable.  It connects to the 3G upper cable and to the Zumo cradle.  This lower cord is typically used by Sport, Sport-Touring and Cruiser riders that use the Zumo for their only audio system and are using our 3G headsets with it.   The cable supports Bluetooth Phone calls (incoming and outgoing), Voice Dialing, and also lets you hear XM Radio, MP3 player and Voice Nav prompts if you have those features activated. 

NOTICE: This cable DOES NOT integrate the Zumo into a Goldwing system.  If you want to do that, get the '1800 Mic Splitter' cable, which will allow you to use your headset normally, but also supply the Zumo with a microphone signal for phone calls, and you will hear the audio from the Zumo over the AUX on the Goldwing (cables available at any electronics outlet, look for '3.5mm headphone extension cable'.

Go to Headsets Page
View GL1500/1800 Mic Splitter Instructions

This cable is a direct 2G EdSets-to-Zumo lower cord typically used by Sport, Sport-Touring and Cruiser riders that use the Zumo for their only audio system and are using our headsets with it.   The cable supports Bluetooth Phone calls (incoming and outgoing), Voice Dialing (if your phone can do that, and activation is up to you since the Zumo can't), and also lets you hear XM Radio, MP3 player and Voice Nav prompts if you have those features activated. 

NOTICE: This cable DOES NOT integrate the Zumo into a Goldwing system.  Get the '1800 Mic Splitter' cable for that application (see item below). 

Go to Headsets Page
View GL1500/1800 Mic Splitter Instructions

Wired Microphone for Zumo 550/660/665, some Nuvi with mic and audio jacks and similar devices.  This is a popular item for Sport, Sport-Touring and Cruiser riders that use a GPS with earbuds or other headphones and want a simple way to get a microphone into the helmet to make outgoing phone calls over the Bluetooth capabilities of the GPS.

You get your choice of a boom mic that mounts with a 5mm thick 1" square tab with Dual Lock snap-on, snap-off adhesive tape (super strong and "way" durable...) or a surface mounted mic that mounts with a 1" square Velcro pad.  You also get a cable with 2.5mm male plug on one end for the Zumo cradle mic input jack, and a Molex connector on the other end for the microphone to plug into.  Comes with Velcro to 'wrap' around the helmet end of the wire so you can attach the wire and keep the 'load' off the Molex connector.